AQuartz Photo catalyst Coating for vehicle interiors
AQuartz Nano TiO2 Photo catalyst Coating System.
AQuartz Clean-Air is a nano formulated photo catalytic surface treatment that turns vehicle interiors into light activated air scrubbers that cleanse interior of objectionable organic odors and indoor air pollutants.
AQuartz Clean-Air works proactively to remove any organic bad odors from the air, including tobacco smoke,
and breaks it down into harmless CO2 gas.
AQuartz Clean-Air is very effective on eliminating unpleasant indoor air.
AQuartz Clean-Air is very effective in removing bad smell, kills bacteria, mildew, eliminating formaldehyde, benzene, ammonia, TVOC and releasing the negative oxygen ions.
AQuartz Clean-Air will last for long time(more than 12months).
Spray once onto the surface to be treated. This will form a very thin and visible film of nano Titanium Dioxide( TiO2) coating that can purify the air for more than 1 year provided the film remains intact.
AQuartz Clean-Air provides the following Key benefits:
>> What's the difference between Clean Air and another TiO2 photo catalytic products?
Because almost TiO2 photo catalytic products are Sulfuric Acid liquid binder, they are harmful to health.
When they are dried, they give off
TVOC, so they cannot be coated on black surface why makes stain.
But, AQuartz Clean-Air is new technology eco-friendly, water based coatings and therefore not harmful to health and can be applied on any surface without stain.
>> The decomposition of organic contaminants:
AQuartz Clean-Air can completely decompose harmful organic contaminants which are hard to be decomposed using purification methods of chlorine or ozone.
Therefore, it is very effective in decomposing and removing endocrine disruptors which are detrimental to environment and organic contaminants, despite existing in small amounts.
NOx, SOx, Dioxine from vehicle exhaust gas, incinerators and power plants.
The dirt is removed naturally. Hydrophilic properties makes the dirt to be washed away by water or rain shower.
The organic compounds on surface are decomposed by an oxidation reaction.
These reactions prevent dirt or organic compounds to be accumulated on the TiO2 film.
>> Cleaning up leftover poisonous gases.
>> Removing of peculiar unpleasant smells.
>> Eliminating bacteria.
>> Preventing formation of mildew.
>> Protecting the basic material.
>> Long lasting, produces an easy to clean surface.
Used in various applications such as on leather, plastic, fabric, wood and paper.
(e.g. unpleasant smells from the vehicle heater and air conditioner air-vents, vehicle cloth seats and ceiling lining, hat, Socks, shoes, clothes, furniture and carpets, curtains, etc)
Typical yield is 500 square feet per liter.
1. Clean the surface / remove dust
and dry the surface.
2. Spray it on the surface, and wipe it uniformly with a soft cloth.
3. Dry it up.
Maintenance 1. Dust on the surface makes the effectiveness reduce.
2. When you clean with the car interiors, do not use any all purpose cleaners,
Cleanair coating will be removed.
3. If you find there is a lot of dust on the surface you coated, remove dust with a dry cloth.
How to apply Clean Air
Measurements of Indoor Air Contamination/Quality after AQuartz Clean-Air coated
Measurement Place: New Song Pa Children's Culture Hall in Seoul, South Korea
Indoor Air Condition before Clean-Air coat.
1. The paint smell was so bad that I could not keep my eyes open, my eyes were stinging from them.
2. It was hard to breathe due to lack of oxyen and bad smell.
3. I had a runny nose, sore throat and a cough, it's a hacking cough and it hurts, too.
To remove the paint smell and refresh indoor air quality, we have coated Aquartz Clean Air on the indoor whole wall.
You can see the result report that the effect of clean-air coatings.
Air Quality Measurement Report
Microbe in the Air
2010/10/06 ~ 2010/10/08 10:00 ~18:00
Less than Safety Standards
Up to 12 months shelf life time if closed well and kept in cool dark space.