무한멀티메뉴


 
 
 
 

    AQuartz ReLoad Premium

 
Container: 50ml, 400ml, 1Liter/5Liter
 User Guide /  MSDS

AQuartz ReLoad - Up Load Coating Sealant for Super hydrophobic water/dirt repellency

 
 

AQuartz ReLoad - Nano TiO2 Upload Coating System.
The fastest and most effective spray sealant - spray on and wipe off!
ReLoad is a water-based product mainly composed from special modified silicon polymers (not silicone), glass based coating.
ReLoad will leave a temporary layer and shield of protection on the applied surface.
It has hydrophobic water repellency, with high gloss appearance.
Very easy to use!
For enthusiasts or professionals - simple yet durable coating and cost effective.
Versatile coating that can be used on either wet or dry surface.
Washing the car will be easy and fast, leaving less water marks on surface.
Durable - more than 4 months durability on car paintwork with very high gloss shine,
Can be used to top AQuartz Coating.
Suitable for use on any paint, rubber, plastic & glass.
Reload protection - the easy and fast protection!!
Alone or with AQuartz!

 
 
 
AQuartz PPF is a base layer for protect car paint from the outside damages like a film cover,
and Titanium and Reload are a top layer for the effect of gloss, water-repellent, etc.
AQuartz Reload Premium на скорую руку.
- Water Beading -
 
AQuartz ReLoad Premium coatings provide the following Key benefits :
  • Easy, Fast application
  • Suitable for any surface
  • High Gloss.
  • Super Water/Dirt Repellent
  • AQuartz ReLoad Durable over 6 months
  • AQuartz ReLoad Prenium Durable over 12 months
Precautions
  • Please work in a well ventilated space.
  • Avoid mixing it with detergents or any other products
  • Please wash your hands with soap and water after application.
  • Keep out of reach of children.
 
How to use?
  • Make sure surface is clean from solvents or wax and in perfect condition
  • Shake well, spray the ReLoad after washing the car, or when it's dry
  • Wipe off with a new Microfiber towel.
  • No need to use high pressure while wiping.
  • Average use per car: 50ml.
 
ReloaD Application
 
 

TIP: How to get the best hardness layer?

1. The surface needs 2~3 layers of the base coating or top coating first, and you try to apply top coating of 1~2 times at intervals of about three or four days.
2. Before you try to apply, you must remove all surface contaminants and wash and rinse off all the residue of cleaners thoroughly. The residue of cleaners make the hardness week.
3. After coating, you need to take plenty of time to dry the layer off completely for the sun and the air or with a heat gun or a hair drier, etc..

Aplicação AQuartz Reload. by Viny detailer
 
Test
  • ReLoad in inconspicuous area before applying the whole car.
  • In case of uneven areas, polish and use AQuartz PreLoad before ReLoad used.
  • Avoid working under direct sunlight and hot surface.
Tip :
  • Before spraying ReLoad on dry surface , better to mist the paint with water spray, for easier wipe off.
 
Storage
  • Up to 24 months shelf life time if closed well and kept in cool dark space.
 

Which coatings do you like?

"- For the best protection,
we recommend you to apply Top coating on the surface AQuartz PPF coated,
but you can use them independently if you want."
 
 

AQuartz All Coatings

 
       
             
PPF Base Base Coat
TitaniumV1 Top Coat
TitaniumV2 Top Coat
TitaniumV3 Top Coat
T-Cera Top Coat
T-Fusion Top Coat
ReLoad Top Coat
 
Before asking, Search first!!
>> Frequently Asked Questions <<
 
 
COPYRIGHT © AQUARTZ.ALL RIGHTS RESERVED. 2008
Privacy Policy