무한멀티메뉴


 
 
 

AQuartz T- Cera Top Coating

 
 
 
 
Containers: 40ml, 70ml, 250ml, 500ml, 1 Liter, 5 Liters
User Guide / /  MSDS
 


AQuartz Crystal 9Hardness Top Coating for Car Paint & Windshield



The world's most finest automotive inorganic Titanium Coating.
AQuartz is the next generation of protective coating for automotive surfaces.
It offers an extremely durable crystal coat which protects against acid rain, bird droppings, road film, tar
and harmful UV rays.
As AQuartz have the highest level hardness (9 to 12h) and the adhesive strength of the paint,
it will minimize the appearance of light scratches.
It will also protect the car paint longer.
Besides protecting, it also offers a rich gloss, near glass like finish, with a self cleaning effect, making future washing of your vehicle faster and easier!
AQuartz T-Cera is a very simple application, anybody(beginner) can apply it without any problem.

 
The simplest application is the best coating.
 

It's definitely different from the conventional glass coating!
The auto dealers after having used numerous Japanese coating products understand this obvious difference.
We have developed new formula titanium coatings for the simplest application and made a perfect Sealant
that can strengthen the advantage of Titanium Coating and make up for the weakness of Japaness Glass Coatings.

 
What are the Weakness of existing Japaness Glass Coating?
 

- Photographic Watermarks
- Weak Hardness
- Weak Adhesion
- Hard Application
- Long time Application
- Nasty Smell
- Hazardous goods
- Hurtful to the Health
- Hard Maintenance
- High Price
- Ban use Automatic washing machines.
You are still using such as above coatings?
AQuartz will make you feel the difference between AQuartz Titanium Coating and Japaness Glass Coatings.
It was added to AQuartz Titanium formula as below;
AQuartz T-Cera : Transmitting liquid, no smell, very simple application: 15% AQuartz Titanium + 85% new formula.
It's a new product, we call "T-Cera".
They are perfect Coating that you can wash your car with a Automatic car washing machine.
Though T-Cera has high slippery property, it has also Water/Dirt Repellent effect.

 
 
 
 
 
AQuartz T-Cera provides the following Key benefits::
 

* Easy to Application / Applying time saving : Very simple / quick application / Quick drying.
* Suitable for over all finishing car body plus windshields & car seats.
* Can be coated on any color of car paint, no stain problem of black color car even without any problems.
* Can be coated on a new car within 2 hours only, and very simple & easy application than other products.
* Very high slipping effect and Excellent Water/Dirt Repellent effect - Long-lasting Hydrophobic effect.
* No stain surface, no water spot, no cracking, no swirl marks.
* Semipermanent lasting, easy to clean surface/self cleaning effect, less fingerprints.
* High Deep Gloss & brightness and Color Renew.
* Anti-Dirt, Anti-Graffity, Anti-Fingerprints.
* Weather ability and color retention. - Excellent chemical resistance
* Less use of windshield wipers and thus less wear & tear of wiper blades.
* Less use of windshield washer fluid.
* Wonderful visibility when driving in heavy rain (over 38km/h, no need to use wipers operating):.
* Easy to clean surface against salts, calcium, oil, grease & other contaminants.
* Stops salt efflorescence, Moss & algae rejecting
* Prevents sticking of insects and bugs, insect, flies, moss & algae rejecting
* Preserves Resale Value of New Car
* Preserves Resale Value of Used Car
* High hardness over 9H scale - Resistant to formation of light scratches & swirl marks.
* It is possible to wash your car with a Automatic car washing machine after coating.
* No more need to wax or polish.
* Cost effective : only 20 ml per one whole car(paint, glass, wheels)

* Use it In constructing the window film,
- T-Cera gives you a quick & Easy finish without scratches, water air and any faults.
- It can be protected the window film against scratches arising from rolling up-down the car window.
- Smoothing operating in rolling down & up the windows.

 
 
 
 
 
 
 
- AQuartz T-Cera Top Coating Application & Care -
 
 
- Preparation Check List -
 
You should have to search all exterior surfaces of the vehicle before applying AQuartz Coating.
 
+ Wash vehicle with AQuartz Snow Foam Shampoo or Clean Shot, rinse and dry.
+ Use Iron Cut to remove iron fallout if you need.
+ If you fine discolored car paint by stubborn stains, use Super Cut to renew car original paint color and remove any tar spots & stubborn stains from the car paint , glass and wheels.
+ Car paint & Glass(Using 2:10 Super Cut with water), Wheels (using 1:1 Super Cut with water) If the paintwork feels uneven you may need to use a clay-bar with spraying Titanium V2 to remove surface contaminates.
+ If required, compound and polish to remove light scratches and swirls,
afterwards, use AQuartz+ Xcelerator to finish polish work.
+ Before AQuartz applying or after compound polishing, you must remove residues with AQuartz PreLoad.
+ Use a soft microfiber swirl and oil free cloth to buff the painted surface to remove dust and smudges.
 
- T-Cera User Guide -
Approximately one complete full-sized automobile per 20ml.
Prepare a cosmetic cotton pad or the sponge applicator wrapped with the suede microfiber towel
and a clean dry microfiber cloth.
But if you can spread evenly the liquid with a microfiber towel well, prepare 2 clean dry microfiber cloths only.


In order to obtain perfect results, please follow steps of AQuartz Detailing Program as below:
1. Remove all residues with AQuartz PreLoad before Coatings applied.
2. Leave surface to rest ~5min, afterwards, coat PPF Base coating.
3. Apply T-Cera after the layer of PPF be dried completely. : after 12 hrs curing period
4. To get a perfect protection, coat Titaniun V3 on the layer of T-Cera be dried completely(after 24 hours).
** Because T-Cera is a DRY Coating, after car wash, dry the car before coating
** Must always use a soft microfiber swirl and oil free cloth to buff the painted surface to remove dust and smudges.
 

1. Make sure you remove all the residue of cleaners or polish thoroughly with AQuartz PreLoad.
2. Before AQuartz T-Cera is applied, you can apply AQuartz PPF Base coating to get the effects of a car paint protect film.
3. If you have coated PPF, apply T-Fusion after the layer of PPF be dried completely. : 12hrs later.
4. Shake well to mix, pour 3~5 drops on the surface or the sponge applicator wrapped with the suede microfiber towel.
5. Spread it in straight lines, criss-cross motion on each car panel evenly, let it be for 5~8 minutes.
6. Wipe & polish contents in circular motions with DRY/CLEAN microfiber cloth gently until no marks left continuously.
7. Wipe all patches or streaks off from the surface with the towel turning both sides alternately
    Enough buffing/polishing is required until all patches or streaks are removed.
    The frictional heat and static electricity by force from enough buffing can make the strong bonding, high hardness,
   high gloss is achieved and the Nano Titanium particles to infiltrate into the paint or glass.

8. Repeat steps 5~7, finish by wiping down with a new microfiber towel.
9. Let dry it up, it takes 30min to cure at 30℃.- The more it cures better water repellent it shows.
    At below 20℃ or a cloudy weather, you should use a heat gun, IR heater lights or sunlights to get short curing.
** It is very important of drying the surface,
** if you should dry off the surface coated well with a hair-dryer or a heat-gun, the layer will be semipermanent lasting.
** The heat Temp. : about 80~120℃ degree with raising the wind,
** but it is too hot, maybe, it makes to lose hydrophobic effect.
** When it's over 28℃ in your country, you should let it dry in the sun without a heat-gun.
10. For additional T-Cera coatings, apply them after 60 mins curing period.
      Completely cure with NO rain takes 24h at 30°C. - Do not drive the car during this time.
      We are strongly recommend to coat AQuartz T-Cera with 2~3 layers, it will give more thickness, durability and hardness.

** After coating, take plenty of time to dry the layer off completely for the sun & the air, etc.
** For the complete protection and the best results, you should coat AQuartz PPF base coating before AQuartz Top Coating.
** AQuartz PPF can function as a car paint protect film.

 
- Windshields Coating -
 

T-Cera can be applied also to the front windshield, giving rain & dirt repellent, self-cleaning, smoothing / sliding effect.
Follow the same process as the application on car paint surface 6~8 application.
1. Clean the windshield thoroughly by using Super Cut, rinse, dry the car.      
2. Use AQuartz PreLoad to remove all contaminants from the glass.
3. After T-Cera coated on windshields, coat on wiper blades, it will make the wipers smooth operate giving you a clear view.

 
- Rotary Machine Application Guide for AQuartz T-Fusion -
 

1. Pour 8~10 drops of AQuartz T-Cera on the AQuartz Microfiber Buffing Bonnet and immediately start to polish
    with a rotary machine at 600~1000RPM speed.
2. For next Steps, refer to above Hand-Coating mentioned.

 
 
- MAINTENANCE -
 

To care for and maintain your T-Cera coating it should be washed by hand using a soft microfiber towel or Wash Mitt,
or use a high-pressure water-jet.
If required, you can recoat Dry-Coat ( T-Cera, T-Fusion) after drying the surface.
After car wash, coat AQuartz Wet-Coat (Titanium V2, V3, ReLoad Pre) on the surface periodically.
In order to get long lasting, on re-coating intervals of about three days, the duration should be more than 3~4 years.
After cleaning with Automatic washing machine , if you find light scratches, re-coat T-Cera on the surface to remove them

 
 
 
 
 
 
How to apply T-Cera
 
 
 
T-Cera Wheel Coat
 
 
 
 
Detailing T-Cera Service for old car
 
 
 
 
Another T-Cera Use
 
- Another use of T-Cera for constructing the window film -
 

In constructing the window film for use in home, building and auto windows, T-Cera gives you a quick, simple and easy finish without scratches, water air and any faults.
It can be protected the window film against scratches arising from rolling up-down the car window.
The layer of T-Cera coated can protect the windows film against scratches and contaminations sticking.
Can be coated on brochures also, it keeps like new long time too.

 
- Video of the function of T-Cera In constructing the window film, -
 
 
 
- Another use of T-Cera for Mobile Phone and Glass Protect Coat -
 

- Protect against scratches and dirt,    - Smooth to the touch,     - Easy to clean,    - Renew

 
- Video of Mobile Phone and Glasses Product Coat -
 
 
 
 
 
 
- Video : Leather coated AQuartz T-Cera on -
 
 
 
 
 
 
 

We have a wide selection of coatings.


We have two types of car coatings, one is based water for wet-coat, another is besed diluent agents for dry-coat.
The wet-coat has an advantages of simple & quick application, and the dry coat has better long lasting & high hardness.
Wet-coat can be coated without dying after car cleaning / washing, but Dry-coat be used in dry surface after car wash.

To take the perfect protection & best results, we recommend you coat AQuartz top coating product on the layer of PPF.
After PPF Base coated, try to recoat AQuartz top coating product to get long lasting, water beading, slippery surface, high gloss, anti graffiti property, self cleaning, etc.

We are selling Top Coatings, TitaniumV1, TitaniumV2, TitaniumV3, Reload are wet-coatings for wet surface
and T-Cera & T-Fusion are dry coatings.

 
 
 

You can choose which coating you like.

 
If you want to see each product details, Click above a product name
 
 
 
 
PRECAUTIONS
 

- Please work in a well ventilated space.
- Avoid mixing it with detergents or any other products.
- Do not use for other purpose. - Please work in adequate ventilated space (we suggest using face mask while working).
- Wear appropriate protective gloves to prevent skin exposure.
- Please wash your hands with soap and water after application.
- Keep out of reach of children..

 
 
 
 
 
STORAGE
 

- Avoid direct sunlight
- More than 24 months shelf life time if closed well and kept in average room temperature.
  (1~20 deg. : 24 months, 20~35 deg. : 12 months long).
- Don’t drink and avoid long time skin contact.
- If accidentally splashed in the eyes, flush immediately with water for at least 15 minutes
- If accidentally swallowed, seek immediate medical attention by calling your local Poison Information Centre.

 
 
 
 
 
 

AQuartz All Coatings

 
       
             
PPF Base Base Coat
TitaniumV1 Top Coat
TitaniumV2 Top Coat
TitaniumV3 Top Coat
T-Cera Top Coat
T-Fusion Top Coat
ReLoad Top Coat
 
Before asking, Search first!!
>> Frequently Asked Questions <<
 
COPYRIGHT © AQUARTZ.ALL RIGHTS RESERVED. 2008
Privacy Policy